PockOperation Properties

The PockOperation type exposes the following members.

Properties

	Name	Description
	AdditionalPockType	Gets the additional pocketing operation type as defined by AdditionalPocketingTypeEnum. The additional type indicates whether this is a standard pocketing operation, a projected/grouped main operation, or an additional supplementary operation that refines or completes pocketing geometry.
	CuttingParameters	Returns the CuttingParameters that define the motion speeds and feedrates for the operation. Cutting parameters govern spindle rotation speed (rpm) and tool movement rates across all phases of tool engagement including cutting, landing, lead-in/out, and withdrawal movements. (Inherited from Operation)
	Name	Gets the user-displayable name of the operation. (Inherited from Operation)
	OperatingToolData	Returns the OperatingToolData that specifies the spatial orientation and tool alignment for the operation. Operating tool data establishes the tool's three-dimensional direction vector and rotational angles required for proper tool positioning relative to the workpiece during cutting. (Inherited from Operation)
	OperationType	Gets the operation type as defined by OperationTypeEnum. The operation type determines the manufacturing method and tool path strategy used during execution. (Inherited from Operation)
	OrderNumber	Gets the sequence number indicating the execution order of the operation. Lower sequence numbers execute before higher sequence numbers in the manufacturing workflow. (Inherited from Operation)
	Side	Returns the Side object that defines the workpiece face and coordinate system where the operation is performed. The side provides positional and orientation information necessary for spatial operation placement and execution. (Inherited from Operation)
	Spindle	Returns the Spindle object that provides the tool and rotational characteristics for the operation. The spindle defines which tool is mounted and the spindle's rotation properties required for tool engagement. (Inherited from Operation)
	Trajectories	Returns the collection of PockTrajectory objects that define the complete cutting sequence for the pocketing operation. Each trajectory in the collection represents a distinct phase of material removal including roughing passes with step-over patterns, island avoidance, middle removal, and finish contour refinement. The trajectories are executed in sequence to progressively remove material from the pocket while maintaining optimal tool engagement and achieving the desired cavity geometry and surface finish.

Top

See Also